Care Instructions
Please note-The instructions listed below are general instructions for most car seat models. If you have a specific car seat that you would like instructions on please contact us and we will be happy to send you instructions. Ritzy Baby car seat covers fit most car seat models. Ritzy Baby covers are a slipcover only and are not meant to replace any original manufacturer’s equipment.
Britax Infant Companion 2004-2007 Instructions
Infant Car Seat Cover and Canopy Instructions
Infant Carseat Cover Instructions
If you do not have your Britax handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Slip your Ritzy Baby Cover over the top of the original Britax cover. Repeating the above process in reverse, making sure all seatbelts are placed in the correct places and secured in the back with the metal bracket.
Canopy Replacement Instructions
1. Push the Britax canopy to one side, exposing the plastic support bars that hold the canopy in place.
2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support
bar apart (as if you were playing tug-of-war).
3. Once the support bars are apart, remove the old Britax canopy and slip on the Ritzy Cover Canopy.
4. Secure the support bars by snapping them shut, and then slide the canopy into place (do this for both the
front and back support bars).
Peg-Perego Primo Viaggio 2002-2005 Instructions
Peg-Perego Primo Viaggio (2002-2005) – Replacement Car Seat and Canopy Instructions
Infant Carseat Cover Instructions
If you do not have your Viaggio handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Slip your Ritzy Baby Cover over the top of the original Viaggio cover. Repeating the above process in reverse, making sure all seatbelts are placed in the correct places and secured in the back with the metal bracket.
Canopy Replacement Instructions
1. Detach the whole canopy from the carseat.
2. You should have in your hands the whole original canopy with support bar.
3. Slide original canopy slightly to one side, exposing the support bar that clicks into the plastic bracket
(you will see where the bar attaches to the circular plastic bracket).
4. Where the bar slides into the circular plastic bracket, take a very large, standard (flat) head
screwdriver. Slide the flat end up under the space between the bar and bracket, and lift the bracket high
enough to slide the bar out from under it (pulling gently on the bar while lifting the bracket).
5. Slide off the original Viaggio canopy and slip on the Ritzy Baby Cover Canopy.
6. Snap the bar back into the Viaggio bracket and adjust your Ritzy Baby Cover Canopy.
Peg-Perego Primo Viaggio 2006 and 2007 SIP – Instructions
Infant Carseat Cover Instructions
If you do not have your Viaggio handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Slip your Ritzy Baby Cover over the top of the original Viaggio cover. Repeating the above process in reverse, making sure all seatbelts are placed in the correct places and secured in the back with the metal bracket.
Canopy Replacement Instructions:
1. Detach the whole canopy from the carseat.
2. You should have in your hands the whole original canopy with support bar.
3. Slide original canopy slightly to one side, exposing the support bar that clicks into the plastic bracket. You will see that the end is a wide circular piece that will need to be removed prior to placing Ritzy Baby canopy.
(you will see where the bar attaches to the circular plastic bracket).
4. Where the bar slides into the circular plastic bracket, take a very large, standard (flat) head
screwdriver. Slide the flat end up under the space between the bar and bracket, and lift the bracket high
enough to slide the bar out from under it (pulling gently on the bar while lifting the bracket).
5. Slide off the original Viaggio canopy and slip on the Ritzy Baby Cover Canopy.
6. Snap the bar back into the Viaggio bracket and adjust your Ritzy Baby Cover Canopy.
Graco Snugride and Safe Seat
Infant car seat cover and canopy replacement instructions
 
Car seat Cover Instructions
If you do not have your Graco handbook then please follow these directions:
a.) In the back of the carseat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Slip your Ritzy Baby Cover over the top of the original Graco cover. Repeating the above process in reverse, making sure all seatbelts are placed in the correct places and secured in the back with the metal bracket
Canopy Replacement
1. Push the Graco canopy to one side, exposing the plastic support bars that hold the canopy in place.
2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support bar apart (as if you were playing tug-of-war).
3. Once the support bars are apart, remove the old Graco canopy and slip on the Ritzy Baby Cover Canopy.
4. Secure the support bars by snapping them shut, and then slide the canopy into place.
Britax Roundabout and Marathon Toddler Covers– Car Seat Cover Instructions
Carseat Cover Instructions
If you do not have your Britax handbook then please follow these directions:
a.) In the back of the car seat, unlatch the seatbelts from the metal bracket
b.) Pull the loose seatbelts from the front, and they should slip right out of the seat
c.) Once the seatbelts are out of the original Britax cover,( and laying on top loose) Then slip your Ritzy Baby Cover over the top of the original Britax cover. Repeating the above process in reverse, making sure all seatbelts are placed in the correct places and secured in the back with the metal bracket.
|
